digital heat press t-shirts
Creative Youth Enterprise, Inc.
Light transfers are only used for light colored
shirts like yellow and light blue. You print your design in mirror
image (words and sentences are flipped horizontally and is not readable
just like the word Ambulance is written in a hospital ambulance) and
place the light transfer facing down (print faces down). While hot,
peel off the backing and the transfer is done (design should now be
readable if there were texts included). With light transfers, there is
no need to cut the part where there was no print (i.e. the white part) because they will just melt on the fabric.
Dark transfers can be used for both light and dark colored shirts. The transfer gives a rubberized feel. You print the design normally (readable) then peel off the design before transferring using the heatpress. The white part or the part where there is no print
will be visible on the finished transfer unless you cut them off (some
complicated designs are difficult to cut and you might need a desktop
cutter for that – a machine that cuts paper with the shape you
specified on its bundled software – used in making stickers as well .
We usually just use a pair of scissors to cut the design – works for
Sublimation Paper can be used
effectively on dri-fit material like badminton shirts of addidas at
nike. Sublimation paper should only be used using sublimation ink. This
works also on 70/30 polycotton. Please understand that only
sublimation ink can be transfered on a polymer fiber, therefore if you
use a t-shirt with 50/50 polycotton, you will get just 50% result.
Likewise, with 70/30 polycotton, 70% result. advisable ito sa.
have been experimenting constantly to create the best and durable
transfers and we always update our clients on new materials and methods.